Zkittlez Terpenes, Sought-After Aromas (2024)

The cannabis terpene profile Zkittlez by Cali Terpenes is a combination of terpenes with the same composition as aromatic extracts (terpene extracts) as the US cannabis strain Zkittlez, which comes from a cross between Grape Ape x Grapefruit x Unknown strain.

Made using the highest quality prime materials proceeding from GMO-free crops, without pesticides or any contaminating agents.

Zkittlezterpenesdon’t contain any type of thinner or diluent, nor do theycontain cannabinoids(THC, CBD, CBG, CBN…).100% aromain liquid format.

The terpene profile Zkittlez acts alongside other elements such as cannabinoids in what's known as the entourage effect. In products such as flowers, extracts or tinctures which contain cannabinoids, terpenes can contribute to the effect they produce.

In this case, Zkittlez provides a stimulating, pleasing, creative and fun sensation.

Ideal for improving the mood, relieving pain and daily stress.

Our Terpenes have an endless list of uses, although mainly they're used toprovide flavors and aromasof specific cannabis strains to all types of products, such as:

• Vapable liquids(e-liquids)
• Concentrates and cannabis extracts(rosin, dry, BHO, CBD and THC distillates for vaping in Vape Pens).
• Edibles and beverages; check out our food grade terpene catalogue.
• Hemp or cannabis flowers.
• They're also used to enrichcosmetic products(creams, perfumes etc.)
• Can be used with all types of tools and systems designed foraromatherapy(diffusors, candles, essential oils etc).

If you need more info onhow to use terpenes, check out ourTerpene Use Guide!

Theseterpenes are 100% pure, so they need to be handled with caution and should never be consumed without being mixed with the destined product (except forcold tastings, in which terpenes are used in their pure state).

Once diluted in the desired product and in theright proportion, terpenes are100% safeand provide aromas and other benefits.

1ml terpenes = 40 drops (0.025ml per 1ml dropper drop), so 1 drop of terpenes represents around 0.25% approx. of 10ml of liquid base:

• 1 drop in10ml = 0.25%
• 2 drops in 10 ml = 0,50%
• 4drops in10ml = 1%
• 8drops in10ml = 2%
• 12drops in10ml = 3%

*It's recommended to test quantities starting at the lowest, as our terpenes have an easily intense aroma and flavor when used.

Check out ourterpene guideto find out more about terpene uses and methods.

Liquid Vaping Bases (for creating e-liquids)

The recommende amount of terpenes and the most used in order to provide enough flavor to e-liquid bases isbetween 1 and 3% terpenes(you can use up to 4, although the most common is 2%)

For example, if you wanted to add 2% terpenes to 10ml e-liquid base, you only need to use 0.2ml terpenes, and for 100ml e-liquid base and 2% terpenes, you should add 2ml.

HOW TO MAKE E-LIQUIDS WITH TERPENES

Cannabis Extracts and Concentrates

The recommended and most common amount of terpenes used to add enough flavor and aroma todry extracts(dry hash or traditional hash),jelly, BHO (wax, shatter, live resin...)rosinor THC and CBD distillates is between1 and 3% terpenes(you can use up to 4% maximum, although the norm is 2-3%).

For example, in order to add 3% terpenes to 10g cannabis concentrate such as clear, a type of distillate, you only need 0.3ml of terpenes.

We highlyrecommend testing the amount used, starting small- for example, use 1 drop for 3g, 1 for 2g, 1 for 1g, and then wait a few days to test them out and see which one is best for yoru specific taste depending on the proportions used.

It's important to properly mix your creation so that the results are even and balanced, and you shouldlet it sit for at least 24/48h before consumingit so that the terpenes can be fully absorbed.

Another great way to add terpenes to extracts is to useTerps Spray.

Discover how to add terpenes to cannabis extracts and concentrates step by step with our guide:

HOW TO USE TERPENES IN EXTRACTS

Hemp or Cannabis Flowers

Terpenes can also be used to increase and improve the aroma produced by hemp or cannabis flowers (buds). It's not recommended to add over 4% terpenes to flowers, and in some cases you may need to use even less as the flowers may already contain some of their own terpenes. An excess of terpenes can produce an intense aroma that may be too much and not pleasant at all.

The ideal way to use terpenes with flowers, buds and dry herbs is by usingTerps Spray.

Discover everything you need to know about Terps Spray in our posts:

HOW TO ADD AROMA TO FLOWERS

WHAT'S TERP SPRAY AND HOW TO USE IT

If there's a smaller amount to spray (from 1g to 10g), it might be cheaper to use a sheet of dryer paper with a couple of drops of terpenes, and place it in an airtight container alongside the dry flowers - after a few hours, they should smell much better.

We recommendstoring flowers in airtight and/or vacuum sealed containers, as this allows terpenes to fully soak in to the flowers, providing a more even and balanced experience.

Edibles and Beverages

The correct proportion of our terpenes (cannabis aromas) recommended for food and beverages is a lot lower than that used in e-liquids and cannabis products.

The amount of terpenes always depends on the base of the food or beverage being made, as well as the process used.

We recommend using terpenes during the cold processes and when there are no pressure changes (for example, vacuum drying) as this stops possible evaporation and allows for them to fully dissolve and be absorbed into the food or beverage.

Some examples of proportions used in food and beverages are:

• Ice cream: from 0.025 to 0.1ml for approx. 1kg depending on the desired intensity
• Beer: from 0.01 to 0.05ml terpenes for approx. 1L of beer, depending on the type of beer, the point of the process in which terpenes are added, and the desired intensity.
• Soda water: from 0.01 to 0.05ml for approx. 1L of water, depending on the desired intensity.
• Oils: from 0.1 to 0.3ml terpenes per 1L of oil, approx., depending on the intensity of the oil and the desired aromatic intensity.
• Honey: from 0.1 to 0.5ml of terpenes for 1 to 2kg of honey approx. depending on the intensity of the honey and the aromatic intensity desired.
• Chocolate: from 0.25 to 1ml per approx. 1KG, depending on the type of chocolate and aromatic intensity desired.

*In most cases, letting terpenes sit for a while can help them settle better. For example, honey with terpenes has more flavor 24h after applying compared to freshly applied.

FOOD WITH TERPENES: RECIPES

BEVERAGES WITH TERPENES: RECIPES

• Our terpene profile packaging has safety valves, anti-leak technology and screw tops.
• After using the product we recommend placing each element back toavoid possible terpene evaporation or contamination.
• Terpenes are volatile compounds, their recommended storage is in a fridge (approx. 7 degrees C) to avoid evaporation when use.
• The temperature at which terpenes are handledshould never go over60ºCto avoid evaporating the most volatile terpenes.
• Keepterpenes in their original containerat all times, as the material used (dark glass that doesn't allow UV rays through) is designed tobetter preserve thermo or photosensitive products. This protects them from changes in temperature, cross contamination etc (terpenes can act as a diluent and corrode materials such as plastic).

• Cali Terpenes S.L. is registered as an exporting company with the FDA (Food and Drugs Association).
• Cali Terpenes follows all European vaping guidelines.

If you need technical sheets or safety data on our terpenes, please get in touch with us.